Directions for use – Guardian Technologies H7500 User Manual

Page 4

E-6

E-7

1. Separate the tank from the

base of the unit.

2. Flip over water tank and open the

tank lid, turning it to the left.

Pour cool, clean water directly

into the tank. Do not pour anything

but water into the tank.

Close the tank lid, turning it to the right.

It is important to FIRMLY secure cap after

filling the tank with water.

SET UP

Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air

flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some

flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.

Guardian Technologies will not accept responsibility for damage caused by water spillage.

FILLING

Make sure unit is unplugged.

DIRECTIONS FOR USE

7. Power Button

Before turning on make sure there

is water in the unit. Press the

Power button.

Attach the tank to the base of the

unit and plug in.

Power

ON/OFF

Warm

Timer

Light

Mist

4 8 12

III

Extension Wands

If desired, assemble extension wands by

fitting ends together. Then attach to the

humidity spout. The wands will extend

the mist to a higher level in the air to

help disperse throughout the room.

Water Level Window &

Auto Shut Off Feature

The tank includes a water level window so

you can easily see when it is time to refill with

water. The unit will

automatically shut off

and a red light will light on the night light ring

if the water level is too low. If this happens,

unplug the unit, remove the tank and refill.

Note: The Night Light feature does not need

to be “on” in order for the low water light

to illuminate.