Cobra Electronics CXR725 - Manual (Page 9)

Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK radio can be used “hands-free,”
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
To turn VOX mode on or off:
1. Press the Mode button until the VOX icon flashes
on the display. The current on or
off setting is displayed.
2. Press the Channel Up or Channel Down button
to turn VOX on or off.
3. Choose one of the following:
a. Press the Mode button to enter the selected
on or off setting and proceed
to other functions.
b. Press the Lock/Enter button to enter
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
1. Press the Mode button until the VOX icon flashes
and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters “LE” and a Number 01 through
05, with Number 05 being the most
sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down button
to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to
Standby mode.
Mode Button
Mode Button
Channel Buttons
Channel Buttons
VOX Icon
Customer Assistance Warranty Introduction
13
Operation
12
Mode Functions
Operation
10 Memory Locations
•
Your microTALK radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These
Memory Locations can be selected individually or
can be scanned. (See page 21 for memory location scan.)
To program a memory location:
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down button
to select the memory location
(0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the Lock/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down button
to select a channel (1 through 22).
5. Press the Lock/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
Mode Button
Channel Buttons
Memory Icon
Lock/Enter Button
Nothing Comes Close to a Cobra ®
VOX Sensitivity Level