GME GD9520 User Manual

Page 7

G d 9 5 0

i n s t r u c t i o n m A n uA l

PA G E 7

Fm3), sequentially press the Bnd button until the required
band is selected.

tuning/selecting tracks/chapters

manual tuning
to tune the radio manually, momentarily press the

button to select the desired frequency. Each press will

step the frequency by 50 kHz.

automatic tuning (seek)
Press and hold either the

buttons for 3 seconds.

the Gd950 will stop seeking when a strong, clear station
is detected.

storing of stations in memory

once the desired station has been selected, press and hold
one of the six pre-set station memory locations on the front
panel for 3 seconds. the corresponding button number will
appear on the lcd indicating that the selected station is
now programmed into the Gd950 memory.

auto programming of radio stations (ams)

select the required band

Press and hold the ams button for 3 seconds; the Gd950
will now commence searching the band for radio stations.
As each station is located it is automatically stored in the
next available pre-set memory location. the new stations
will replace any stations previously stored in that band.

manually selecting the pre-set station memories

Briefly press the desired station memory 1 - 6. the Gd950
will jump immediately to that station and the memory
number will appear on the lcd.

preset equaliser (p-eQ)

the Gd950 has three preset Graphic Equaliser settings
to enhance your audio listing pleasure. to select the P-EQ
mode, press the eQ

button sequentially to select and

display either PoP, clAssic or rocK modes.

note: the trEBlE and BAss audio settings cannot be
adjusted when the P-EQ mode is selected.

cd/mp3/dVd operation

Warning:

do not insert discs containing anything other

than cd, dVd or mP3 files into the disc slot. the cd/dVd
mechanism contains precision laser components which
could easily be damaged by inserting foreign objects.

important:

Because of the wide dynamic range offered

by cd/dVd systems, the difference in volume level between
very soft sounds and very loud sounds can be quite high.
For this reason we recommend that you avoid turning the
volume level up to loud when listening to very soft music or

tracks with no audio level, otherwise a sudden change to
very loud music could damage your speakers.

inserting the cd/dVd

remove the cd/dVd from it’s case and insert the disc face
up into the front panel aperture. the cd/dVd mechanism
will automatically draw the disc into the player and start
playing track 1 or chapter 1 if it is a dVd.

A disc symbol

is displayed on the lcd whenever there

is a cd/dVd in the player. the symbol will simulate rotation
whenever the disc is playing.

ejecting a cd/dVd

Press the eJect button to stop the cd/dVd playing and
automatically eject the disc.

fast forward/reverse

to advance through the present track or chapter at high
speed, press and hold the

button. the elapsed playing

time will be displayed and will advance rapidly. release the
button to continue playing at the normal speed.

to reverse through the present track at high speed, press
and hold the

button. the elapsed time on the display

will decrease rapidly. release the button to continue
playing the present track at the normal speed.

stop

Press the stop button, (numeric button #5 on the front
panel). the disc symbol will stop rotating whenever the
stop function is engaged.

to return to the normal play mode press play, (numeric
button #1 or on the remote control).

step to the next track or dVd chapter

to step immediately to the next track, press the

button

once. the next selected track will begin playing, press the

button to advance to the start of successive tracks.

to step immediately to the start of the track currently being
played, press the

button once. the current track will

immediately restart. Press the

button repeatedly to

locate the start of previous tracks.