GME SPK006W - Manual (Page 2)

A Division of
Head Offi ce: SYDNEY- Locked Bag 2086, North Ryde, N.S.W. 1670, Australia. Tel: +61 (0)2 9844 6666 Fax : +61 (0)2 9844 6600
MELBOURNE ADELAIDE PERTH BRISBANE SYDNEY AUCKLAND
7 Micro Circuit 14 Phillips Street Unit 1 Unit 1 Unit B Unit 2
DANDENONG STH 3175 THEBARTON 5031 10-12 Harvard Way 89-101 Factory Road 22-24 College Street 24 Bishop Dunn Pl.
Tel: (03) 9798 0988 Tel: (08) 8234 2633 CANNING VALE 6155 OXLEY 4075 GLADESVILLE 2111 East Tamaki
Fax: (03) 9798 0177 Fax: (08) 8234 5138 Tel: (08) 9455 5744 Tel: (07) 3278 6444 Tel: (02) 9879 8888 Manukau, 2013 NZ
Fax: (08) 9455 3110 Fax: (07) 3278 6555 Fax: (02) 9816 4722 Tel: (09) 274 0955
Fax: (09) 274 0959
For customers outside Australia and New Zealand please contact your local GME Distributor or email: [email protected]
Part Number: 310435 Drawing Number: 44308-1 Website: www.gme.net.au
WARRANTY
GME limit this warranty to the original purchaser of
the equipment.
GME warrant this product to be free from defects in
material and workmanship for a period of thirty six
(36) months from the date of purchase from their
authorised retailer.
Should the product require servicing during this
period, all labour and parts used to effect repairs will
be supplied free of charge. GME reserve the right to
determine whether damage has been occasioned by
accident, misuse or improper installation whereby
the warranty would be void, including equipment
which has been damaged due to:
(a) Reverse polarity connection to a battery
or power supply.
(b) Connection to an incorrect supply voltage.
(c) Non factory modifi cation or repairs.
(d) Use of incorrect or replacement fuse.
(e) Lightening strike or static discharge.
Procedure to be followed by claimant: In the event
of a defect occurring during the warranty period,
the original purchaser may return the defective
unit along with suitable proof of purchase date
(i.e. receipt, docket, credit card slip etc.) and a full
description of the defect to the retailer from whom
the unit was purchased. All freight charges incurred
for transportation by the retailer or GME are the
purchaser’s responsibility.
GME AFTER SALES SERVICE
Your GME product is especially designed for the
environment encountered in domestic or marine
installations. The use of all solid state circuitry, careful
design and rigorous testing, result in high reliability.
Should failure occur however, GME maintain a fully
equipped service facility and spare parts stock to
meet the customer’s requirements long after expiry
of the warranty period.