beautypg.com

Scheduled maintenance, Scheduled maintenance -4 – GMC 2004 Canyon User Manual

Page 378

background image

When you go to your GM Goodwrench dealer for your
service needs, you will know that GM-trained and
supported service technicians will perform the work
using genuine GM parts.

If you want to get service information, see Service
Publications Ordering Information
on page 7-11.

Owner Checks and Services on page 6-9 tells you what
should be checked, when to check it and what you
can easily do to help keep your vehicle in good
condition.

The proper replacement parts, fluids and lubricants to
use are listed in Recommended Fluids and Lubricants
on page 6-13 and Normal Maintenance Replacement
Parts
on page 6-15. When your vehicle is serviced,
make sure these are used. All parts should be replaced
and all necessary repairs done before you or anyone
else drives the vehicle. We recommend the use of
genuine GM parts.

Scheduled Maintenance

When the CHANGE OIL light comes on, it means that
service is required for your vehicle. Have your vehicle
serviced as soon as possible within the next 600 miles
(1 000 km). It is possible that, if you are driving under the
best conditions, the engine oil life system may not
indicate that vehicle service is necessary for over a year.
However, your engine oil and filter must be changed at
least once a year and at this time the system must be
reset. Your GM Goodwrench dealer has GM-trained
service technicians who will perform this work using
genuine GM parts and reset the system.

If the engine oil life system is ever reset accidentally,
you must service your vehicle within 3,000 miles
(5 000 km) since your last service. Remember to
reset the oil life system whenever the oil is changed.
See Engine Oil on page 5-13 for information on
the Engine Oil Life System and resetting the system.

When the CHANGE OIL light appears, certain services,
checks and inspections are required. Required services
are described in the following for “Maintenance

I

” and

“Maintenance

II

.” Generally, it is recommended that your

first service be Maintenance

I

, your second service be

Maintenance

II

and that you alternate Maintenance

I

and

Maintenance

II

thereafter. However, in some cases,

Maintenance

II

may be required more often.

6-4