GIN Basis - Manual (Page 14)

14
Seat Straps
The seat straps adjust the depth of the seat. This depth can be set to be comfortable depending
on your seating position. Lengthening the straps helps you to slide easily to the back of the
seat and shortening the straps helps you to be in the standing position for the landing. In the
sitting position, lengthen the straps to the maximum at first and use the plastic buckles to
shorten the strap to find a comfortable position where the harness supports your back properly.
Speed bar
Hanging in the simulator, adjust the length of the speed bar cord so that the bar hangs at least
15cm below the front of the harness. Making the cord too short could result in the speed system
being constantly and unintentionally engaged during flight. It is safer to start with the speed
bar a little long and shorten it following your first flights. Test the speed bar in flight only after
you are comfortable with your new harness, and always do so in calm conditions with ample
clearance above the ground.