Landing with the yak – GIN Yak User Manual
Page 12
12
Landing with the YAK
Choose a landing area free of obstacles. It is recommended to land with a full flair; it will enable
you to obtain a zero vertical speed and an easy run at the end of the flair. Do not make your last
turn at low height, or make a radical turn close to the ground. Do not approach too slowly with
the back trimmer on and a lot of brake. The best landing approach is with the trimmers set to
neutral and then use a proper flair to bleed of your speed.
You can land with the trimmer in either neutral position or at full speed trim position provided
you manage your flair correctly. Landing in low speed trim position is not recommended.