GIN Atlas X-Alps - Manual (Page 16)

16
TIP: The further in front of you the
glider pitches, the larger the brake input
required, but for a shorter duration.
CAUTION: Never release the brakes when
the glider is behind you but accelerating
forwards.
Active flying
Practice active flying to eliminate collapses in all but the most turbulent conditions.
Keep tension on the brakes approximately equal to the weight of your arms. This allows you to
stay relaxed and sensitively feel the internal pressure in the wing through the brakes. If you feel a
loss of pressure in one or both sides of the wing, quickly apply the appropriate brake(s) to re-gain
pressure. Release the brake promptly as soon as normal pressure is resumed.
If you miss the above timing and get a collapse, be sure to first raise your hands and release
the brakes before considering any other corrective actions.
The Atlas X-Alps has excellent pitch stability. Nonetheless, in turbulence or during
manoeuvres, the glider may pitch. If the glider pitches in front of you, apply brake to slow it
down. If the glider drops behind you, ease off the brakes to allow it to speed up. The objective is
to reduce the pendulum effect by adjusting the speed of your glider so that glider and pilot are
travelling at the same speed.
The same general principles also apply when gliding on bar.