Philips AZ 6801 - Manual (Page 5)

HOLD - INTROSCAN - REPEAT SEARCH KM - »1
HOLD SEARCH KKJ - tW
During PLAY I> you can set the ON/OFF selector to
position HOLD, The buttons are then made inoperati­
ve (except for OPEN). Now, playing a disc is not
interrupted when a button is accidentally touched.
This IS useful when carrying the player with you.
For operating the CD-player, place the ON/OFF
selector to position ON again.
INTROSCAN
The INTROSCAN function can be switched on both
from the STOP □ and the PLAY t> position.
• Press INTROSCAN. The word SCAN then ap­
pears. Only the first few seconds of each track on the
disc are played, but always from the 1 track number.
After playing a few seconds of one track, the CD
player jumps to the next track. The display always
shows the corresponding track number.
• The moment that you press PLAY t>. the INTRO­
SCAN function is defeated (the word SCAN disap­
pears) and the disc is played in the normal way from
this track number.
• If you press W or I
remains operative and the beginning of the next WH
or previous I<3<3 track is played for a few seconds.
• If the INTROSCAN function is not defeated by
pressing PLAY t> or STOP □, then the CD player
automatically returns to STOP as soon as the end of
the disc
IS
reached.
REPEAT
If you want to repeat the whole disc (or the stored
selection) continuously, press the REPEAT-button:
the word REPEAT appears on the display.
The REPEAT function can only be switched on during
PLAYt>,
To defeat the REPEAT-function, press REPEAT again
and the word REPEAT disappears.
These buttons have three different functions:
1. Press briefly (less than 1 second) during PLAY
or INTROSCAN
W - go to the next track (title)
You can jump to the next title by pressing WH once.
The next track number appears on display,
playback is interrupted and the next track is
played.
If you want to skip more than one track, then press
W more than once until the display shows the
desired track number.
I« - go to the previous track (title)
If you want to repeat the running title from the
beginning, press KM once: playback is interrupted
and the same track is played from the beginning.
If you want to repeat one of the previous titles,
press !the required track number.
2. Keep pressed (longer than 1 second) for
search during PLAY
In this way, the disc is played at high speed in the
forward PW or backward lis reproduced partly and at high speed, however,
.it is still recognizable. In this way you can locate
rapidly a certain passage within a track.
Keep the button
(search forward) or !«l (search
backward) pressed until you recognize the re­
quired passage. Then release the button: the disc
will be played back in the normal way from this
passage.
If the button is pressed longer than 10 seconds,
the search speed increases automatically.
3. When programming: press briefly (less than
1 second)
When programming - in position STOP □ with a
disc inserted - you can select the desired track
numbers using 1« and »1, see chapter ’Program­
ming -1. Manual selecting’.