Philips AJ3150/11W - Manual (Page 5)

Alarm Slumbering
SETTING THE ALARM TIME SLUMBER
Alarmtime
• Set the TIME SET switch
@
to ALARM.
• Set the correct alarmtime using the MIN ©
and HOUR ® buttons.
• Set the TIME SET switch © to RUN.
ALARM ON
The clock radio can awaken you in 2 ways:
Wake by radio
'• Make sure the volume of the radio is loud
enough to wake you.
• Set ALARM switch @ to RAD.
• You will be awakened at the set alarm time by
the radio.
Wake by buzzer
• Set ALARM switch @ to BUZ.
• At the set alarm time you will be awakened by
the buzzer
ALARM OFF
The clock radio has a built-in slumber function ®,
which enables you to listen to the radio before
you fall asleep. You will not have to switch off the
clock radio yourself as this will take place
automatically after 59 minutes.
SLUMBER ON
The time you listen to the radio before you fall
asleep is called the slumber time. The
slumber time is 59 minutes.
If you wish to slumber, carry out the following:
• Make sure the TIME SET switch © is set to
RUN.
• Press the SLUMBER button @. The display will
show that you have a slumber time of 59
minutes.
SLUMBER OFF
You can switch off the alarm in 3 ways:
Switching off the alarm for 9 minutes
• Press the REPEAT ALARM button ©. With this
switch you temporarily switch off the alarm.
After nine minutes the alarm (radio or buzzer)
will sound again. If you press the REPEAT
ALARM button ® again, the same will happen.
If the REPEAT ALARM button © is not pressed
again, the alarm will switch itself off after 1
hour and 59 minutes. The following day the
alarm signal will sound again at the set alarm
time.
Switching off the alarm for 24 hours
• Press the ALARM RESET button ®. The alarm
is now switched,off for 24 hours and will sound
again the next day at the same time.
Switching off the alarm completely
• Set the ALARM switch © to OFF. In the
display the ALARM indicator will disappear and
the alarm is now switched off. If you wish to be
awakened the following day again, you must
reset the ALARM switch @ to RAD or BUZ
before going asleep.
You can switch off the radio before the slumber
time has elapsed;
• Press the SLUMBER OFF/REPEAT ALARM
button © and the radio is switched off.
- If the TIME SET switch © is in position TIME or
ALARM, the slumber function will not work.
- The slumber function does not affect the alarm.