Trimming – Philips BG2040 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recharging
Recharging requires a full 1 hour.
Recharge when the charging light lights up
orange. This indicates there is approximately
10 minutes of operating time left.
When Groomer is fully charged, disconnect
the adaptor charging plug from outlet.
Trimming
I
If you are trimming for the first time, be
careful. Do not move the Groomer too fast.
Make smooth and gentle movements.
> Practice trimming at the highest setting (5)
first to prevent accidentally trimming hairs too
short.
I Trimming is easier and more effective when
skin and hair are dry.
o
Hold the Groomer in the trimming position,
with the trimming unit pointing upwards and
the shaving unit pointing downwards (Fig. 5).
D
Press the Hair Length Selector (1) and slide
it to the desired setting (2) (Fig. 6).
The two lines next to the setting selector show
which setting you have selected (Fig. 7).
Trimming Length Setting Table
> The trimming combs allow you to cut hair to 5
different lengths:
Hair length setting
Hair length after trimming
1
1/8 in. / 3 mm
2
3/16 in. / 5 mm
3
9/32 in. / 7 mm
4
3/8 in. / 9 mm
5
7/16 in./ 11 mm
a
Turn Groomer ON by pressing the trimming
unit on/off button (Fig. 8).
D Hold Groomer as shown and move against
the direction of hair growth making sure the
tips of the comb point in the same direction
as you are moving the Groomer. Always
make smooth and gentle movements and be
sure the surface of the comb always stays in
contact with your skin (Fig. 9).
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
positions (i.e. upwards, downwards, or across).
Practice is best for optimum results.
H Turn Groomer OFF by pressing the trimming
unit on/off button.