Supply, Radio reception, Playing back cassettes – Philips AQ6508 User Manual

Page 4: Auto reverse, Maintenance, English, Fast wind, Play reverse 3 v d c, Dbb (bass) dolby nr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

English

SUPPLY

Batteries: Insert as indicated too alkaline batteries, type R6.

UM3 or AA. Remove the batteries if exhausted or if they are not
to be used tor a long time.
Mains adapter: Connect a mains adapter to the 3VDC
socket. The adapter must supply 3 V DC ©-©-0, minuspole

RADIO RECEPTION

• Set RADIO/TAPE to RADIO.
• Connect headphones to PHONES.
• Set BAND to AM (= MW), to FM (mono) or'to FM STEREO.
•

Tune to the desired radio station using TUNING. The

headphone lead vnll function as FM-aerial.

• Ad|ust the sound with VOLUME and DBB (bass).

• If BAND is in position FM STEREO, you will hear FM-stereo

programmes in stereo. The FM STEREO indicatorwill light
up then. The disturbing noise due to a weak FM-stereo signal

can be suppressed by setting BAND to FM (mono). The FM

STEREO -1^ indicator then goes out and you hear the
programme in mono.

• The set is switched off when RADIO/TAPE is in position

TAPE and no cassette player button is pressed.

PLAYING BACK CASSETTES

• Dunng playback you can reverse the tape direction using

REVERSE.

• To Stop, press STOP ■ and the set is switched off.

Fast Winding: Press FAST WIND 44 or ». To stop, press

STOP ■.

AUTO REVERSE______________________________

» The tape direction will be automatically reversed whenever
the player reaches the end of the tape. So, the cassette is

played continuously until you press STOP M (or until the

batteries are exhausted).

MAINTENANCE_______________________________

• Clean the magnetic head after every 50 hours of operation

or, on average, once a month by playing through the cleaning
cassette SBC 114.

• Do not expose the set and cassettes to rain, moisture, sand,

or to excessive heat from e.g. heating equipment or in motor

cars parked in the sun.

This set complies v/ith the radio interference requirements of the

European Community.

The type number v.ill be found atthe back ol the set and the serial number

in the battery compartment

Dolby noise reduction manufactured under license from Dolby Laborato
ries Licensing Corporation DOLBY and the double-D symbol □□ are
trademarks of Dolby Laboratories Licensing Corporation

• Set RADIO/TAPE to TAPE.

• Connect headphones to 0 PHONES.
• Open the cassette holder and insert the cassette in it with
the open part facing the buttons.
• Adjust DOLBY NR OU (Noise Reduction), ON or OFF.
• To start playback, press PLAY 4 ►.

• Adjust the sound with VOLUME and DBB (bass).

PHONES

FM STEREO

TUNING

BAND

TAPE / RADIO

VOLUME

STOP

◄◄ ►►

FAST WIND

◄ ►

PLAY

REVERSE

3 V D C

0 3 $ fTiiTT 01 3 mm

DBB (BASS)

DOLBY NR

□□