Getting started, Charging your headset – Philips SHB7103 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bluetooth adapter:
3.5mm Bluetooth audio adapter
LED indicator light
iPbd Bluetooth audio adapter
On/Off
(included with SHB7I02 only)
(included with SHB7I03 only)
Getting started
Charging your headset
Before you use your headset for the first time, charge the battery of your
headset and your optional Biuetooth adapter for 6 hours for optimum battery
capacity and iifetime.
Use only the original charger (5V, 500mA), Using another
charger may damage or destroy your headset!
Plug the charger into the power outlet and connect the charger cable to the
headsets and the Bluetooth audio adapters (if applicable) charging socket.'
During recharging the LED indicator will show a steady red light. Charging is
completed once the LED has switched off. Typically a full charge will take 3
hours.
' The iPod Bluetooth audio adapter does not need to be charged as it is powered by your iPod.