Connect – Philips MNT510F User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
T
Connect
Connect coaxial cable to antenna
1
Connect supplied coaxial cable to the back
of the antenna.
2 Connect the coaxial cable from your cable
or satellite source to the back of the
antenna to the connector labeled IN
FROM CABLE
Connect coaxial cable to TV
Connect the supplied coaxial cable from the
antenna to the back of your TV using one of
the two methods illustrated*.
Connect power
Connect the power transformer to the antenna
then to AC power outlet.
*lf you have screw connections on your TV. attach the cable to the matching transformer and then to
yourTVYou will need a band separator (not included) to access UHF reception. If you have a 75 ohm
¡ack and a set of UHF screw connectors on yourTV, attach a coax cable to the 75 ohm jack.You will
need a band separator (not included) to access UHF reception.