Flow chart 6exhp functions – Futaba 6EXH User Manual

Page 20

��

��
��

��

FLOW CHART 6EXHP FUNCTIONS

(Screen at Startup)

To enter or leave Programming Mode,

press MODE and SELECT keys

simultaneously for one second.

To change the Stick Mode, turn on

the transmitter holding MODE and

SELECT keys down simultaneously.
Use the DATA INPUT lever to display

the desired stick mode.

Simultaneously Press the

“MODE” and “SELECT” keys and hold them down for one second to enter the programming

mode. Press the keys again (or turn off the transmitter) to exit the programming mode.