Futaba 6EXAP - Manual (Page 19)

19 19
MODE key
MODE key
PCM mode onry
SELECT key
DATA INPUT
lever
[CH 2-5]
[CH 2-5]
[CH 2-3]
[Model 2-5]
[CH 2-5]
To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
To change the Stick Mode, turn on
the transmitter holding MODE and
SELECT keys down simultaneously.
Use the DATA INPUT lever to display the
desired stick mode.
FLOW CHART FLOW CHART
6EXAP FUNCTIONS 6EXAP FUNCTIONS
Simultaneously Press the “MODE MODE ” and “SELECT SELECT ” keys and hold them down for one second to enter the programming
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
(Screen at Startup)
Stick Mode Stick Mode
(press MODE and SELECT keys for one second)