Futaba 4PK 2.4GHz - Manual (Page 30)

Switch
Steering servo
Throttle servo
CH3 servo
To Battery
Receiver
-
+
31
In
stal
lation
Connect the receiver and servos as shown below. Connect and install the receiver and
servos in accordance with "Installation Safety Precautions" on the next page.
The figure shown below is an example. The method of connecting the motor controller to
the motor and battery depends on the motor controller used. Purchase the motor control-
ler and servos separately. The receiver also depends on the set.
When using a 4-channel servo, connect the optional double extension cord to 4/B of the
receiver and connect the 4-channel servo and receiver switch to the connection at the op-
posite side.
Installation When A Erectronic Speed Control Is Used
Installation For Gas Powered Models
Installation
Receiver and Servo Connections