Futaba 3PM 2.4GHz - Manual (Page 21)

22
Installation
Warning
Installation
Receiver and Servo Connections
Installation For Electric Powered Models
When connecting and installing the receiver and servos, read the “Installation Safety
Precautions”.
Installation For Gas Powered Models
R603FF
ESC
R603FF
Installation Safety Precautions
Antenna
tube
Antenna
Coaxial
cable
R603FF
Receiver Antenna Installation
Install the R603FF receiver on the car as follows:
Note: The operating range may become shorter, depending on
where the receiver and the antenna are mounted.
•Install the antenna in the higher place as shown in the figure.
•Keep the antenna as for away from the motor, ESC and other
noise sources as possible.
•Put the antenna in the antenna tube to protect it.
•Do not cut the antenna.
•Do not bend the coaxial cable. Doing so causes damage.