Capresso Coffee Burr Grinder 559 - Manual (Page 4)

BEFORE FIRST USE
IMPORTANT: Coffee grinder will stop automatically when there are no more beans
in the bean container.
1. Check the bean container (B) for presence of foreign objects before using.
2. Make sure the bean container is completely clean and dry before using.
3. Always operate the grinder with the ground coffee container (F) and lid (G) in place.
4. Do not place your hand in or near the burrs.
5. Any servicing other than cleaning and user maintenance should be performed
by an authorized Capresso service representative.
• Unpack the grinder and remove all packaging materials.
• Clean all loose parts with a dry cloth.
• NEVER clean any parts of the grinder in the dishwasher.
• To remove any dust that may have accumulated on the removable parts during
packaging, wash the ground coffee container (F), its lid (G), and the lid of the bean
container (A) with a warm water and mild liquid soap solution. Rinse and dry.
Do not use harsh or abrasive agents to clean these parts.
• Allow to dry completely before use.
CAUTION: Do not immerse grinder or the removable grinding wheel (K) in water.
Do not place the ground coffee container, its lid, or the bean container lid in the
dishwasher.
INITIAL USE
IMPORTANT: Coffee grinder will not operate if the ground coffee container (F) and
lid (G) are not properly in place.
Note: During manufacturing, the grinding wheels (K) are installed so that they touch
initially. The grinder will not function properly while the wheels are touching each
other. To avoid grinding with the wheels touching each other proceed as follows:
For first-time grinding:
• Check to make sure that the bean container (B) is empty, clean and dry, and free of
any foreign objects.
• Plug in the grinder. Set the fineness selector (C) to number "9."
• Fill the bean container with 3 to 4 tablespoons of coffee beans.
• Set the grind amount selector (I) to approximately number "4." Make sure the
ground coffee container (F) with its lid (G) is in place.
• Push and hold the on-button (J) for 2 seconds.
Repeat the same procedure in a different fineness position (e.g. number "3"). You are
now ready to begin using your grinder regularly.
GRINDING
1. Place your Capresso Coffee Burr Grinder on a flat, level surface.
2. Place the cover of the ground coffee container lid (G), on the ground coffee
container (F).
3. Plug the grinder into an outlet.
4.
IMPORTANT: Grinder was tested with beans during assembly. Despite cleaning,
traces of ground coffee may be found in a new machine.