FloAire Fully Integrated Self Cleaning System - Manual (Page 18)

18
Component Description
The following section lists the major controls and components used in the Self Cleaning hood.
Self Cleaning Spray Bar
The Self Cleaning hood contains a spray bar that extends the entire length of the hood immediately
behind the filters in the hood. The bar is ¾” brass fittings with nozzles that spray directly toward the back
of the hood. The same spray bar is used in hot water wash and cold water mist. Water enters the spray
bar via
a ¾” quickseal. The other end of the spray bar is plugged. If hoods are installed back-to-back or
end-to-end, the plugged end of the spray bar can be un-plugged and connected to the next spray bar.
See Figure 6 below for details.
Figure 6