Flight of Harmony V’Amp Ver 1 Module - Manual (Page 5)

5/7
Other connections
Power: The power connector header is a 2x5
shrouded box header which accepts the standard
Doepfer power cable. This header style is polarized,
meaning the connector can only be inserted one way,
to prevent connecting the power backwards and
damaging the unit.
This assumes that you are using either the supplied
cable or one manufactured by Doepfer.
Looking at the rear of the module, the negative
supply (red stripe) is on the left, positive supply is on
the right (see fig.2).
Additional Headers: These access the signals
that go to and from the front panel components. I
recommend that you leave them alone, but not all will
follow such a wish, so feel free to make use of them
for your own DIY 3 needs. However, if you do so, you
do this AT YOUR OWN RISK. We will not be held
liable for damage caused by misuse of this module.
For the adventurous, the table on the next page shows the header
legends for increased clarity, also the expanded text of the labels. There are no
definitions. If you do not understand what the labels mean, do not try to use these
connections.
3) DIY = Do It Yourself
fig.3