Fieldmann FVC 4001 EK - Manual (Page 8)

FVC 4001-EK / FVC 4002-EK
8 EN Maintenance and storage | Technical specifi cations
If the pump is permanently installed, the working order of the switching fl oat should be
checked every 3 months.
Any fi brous deposits that could deposit themselves inside the pump, should be removed
using a current of water.
Mud should be cleaned from the fl oor of the pumping pit every 3 months.
Remove deposits on the fl oat using clean water.
Cleaning the pump impeller
If an excessive amount of debris accumulates in the body of the pump, fl ush the pump out with
clean water.
6. TECHNICAL SPECIFICATIONS
FVC 4001-EK FVC 4002-EK
Voltage/Frequency 230 V ~ 50 HZ 230 V ~ 50 HZ
Power input 750W 900 W
Maximum transferred amount 12 000 l/h 14 500 l/h
Maximum delivery 8 m 10 m
Maximum submersible depth 8 m 10 m
Maximum temperature of the media 35 °C 35 °C
Maximum value of solid particles in the media Dia. 35 mm Dia. 25 mm
Height of the switching point: On Approx. 50 cm Approx. 50 cm
Height of the switching point: Turned off Approx. 5 cm Approx. 5 cm