Fieldmann FZN 2002-E - Manual (Page 15)

15
USER‘S MANUAL ELECTRIC HEDGE TRIMMER
EN Additional safety instructions | Assembly
Before using the machine and after any impact, check for signs of wear or damage and
repair as necessary.
Before using the electric hedge trimmer, always make sure that the hand guard
provided is fitted.
Never attempt to use an incomplete product or one with an unauthorised modification.
Electric Tool Use and Care
Know how to stop the product quickly in an emergency.
Never hold the product by the guard.
Do not use the hedge trimmer if the protection equipment (hand protection, 2-hand safety
switch, protective shield, quick blade-stop) are damaged.
Do not use ladders whilst operating the product.
Remove the plug from the mains
Before leaving the product unattended for any period.
Before clearing a blockage.
Before checking, cleaning or working on the appliance.
If you hit an object. Do not use your product until you are sure that the entire product is in a
safe operating condition.
If the product starts to vibrate abnormally. Check immediately. Excessive vibration can
cause injury.
Before passing the product to another person.
Cleaning and Storing Instructions
WARNING! RISK OF INJURY! Do not touch the blades. When finishing or interrupting the
work, push up the protective shield.
Keep all nuts, bolts and screws secure to be sure the telescopic hedge trimmer is in safe
working condition.
7. ASSEMBLY
(Fig. 2-7)
Electric hedge trimmer assembly in the package (Fig. 2)
At first, push the lockout button 1, and then turn the handle 3 (see Fig. 3)
The handle 3 can be turned in 180°; when unpacked, the handle 3 is in the 0° position (Fig. 4)
WARNING! Prior to assembly, check whether the trigger lockout 5 is not damaged on the
guide handle 4, whether it can move in three directions and whether it can rotate (up, left, and
right), see fig. 5.