Fieldmann FZN 6005-E - Manual (Page 17)

17
OPERATING INSTRUCTIONS TELESCOPIC HEDGE TRIMMER
EN Operation | Maintenance | Storage
As soon as you are ready to trim, press the trigger lock (16) and subsequently the actual tool
switch (17) (see Fig. 9). The hedge trimmer starts. Once the switch is released, the hedge
trimmer stops. Before starting trimming, the hedge trimmer must always be running.
When cutting, place the moving cutting blade near the branch. Hold the electric hedge
trimmer in a stable position.
After the cut, remove the hedge trimmer from the cutting point at full speed. Release the
switch and stop the hedge trimmer. Before turning the pole down to the ground make sure the
cutting blades have stopped.
8. MAINTENANCE
Cleaning the hedge trimmer
ATTENTION! Danger of injury / electric shock!
Before any tool maintenance, always unplug the tool from power supply and fit the blade
scabbard. Do not clean the electric hedge trimmer under running water (particularly not
pressure water).
Wipe the electric hedge trimmer using wet cloth.
Lubricate the hedge trimmer blade using a low-viscosity lubricant. Make sure the lubricant
does not come in contact with plastic parts.
9. STORAGE
ATTENTION! Store the electric hedge trimmer out of the reach of children .
Unplug the power cord from the hedge trimmer.
Clean the hedge trimmer according to the instructions in Chapter 7 Maintenance and fit the
blade scabbard.
Store the electric hedge trimmer in a dry place without the frost risk.