Fieldmann FZR 4617-BV - Manual (Page 9)

EN
PETROL LAWNMOWER USER'S MANUAL
9 Description of the machine | Assembly
3. DESCRIPTION OF THE MACHINE
(fi gure 1)
1. start / brake lever
2. top part of the handle
3. throttle control lever
4. travel lever
5. starting pull cord
6. bottom part of the handle
7. thumb
screws
8. grass catcher
9. mowing height adjustment handle
10. side discharge fl ap
11. oil dipstick
12. side discharge cover
13. lawnmower chassis
14. front bumper bar
15. fuel primer bulb
16. engine
17. rear discharge cover
18. quick couplers of the handle
19. travel speed control lever
4. ASSEMBLY
When using the lawnmower, always proceed in accordance with this manual.
Before using the lawnmower, it is necessary to unpack and assemble it.
ASSEMBLING THE HANDLE
Attach the bottom part of the handle (fi gure 1 – point 6) to the lawnmower chassis (fi gure 1 – point 13) and
secure in place with screws (fi gure 1 – point 7). Then join the top part of the handle (fi gure 1 – point 2) to the
bottom part and secure in place with the quick couplers (fi gure 1 – point 18). Attach the engine brake and travel
control cables to the handle.
Caution! During assembly, be careful not to damage or bend the cables or the bowden cables. Their
deformation may result in the lawnmower not functioning properly.
ASSEMBLING THE GRASS CATCHER (fi gure 2)
Open the rear cover and attach the grass catcher. Hang the grass catcher hook mount on to the shaft of the
cover. Check that the grass catcher is fi rmly in place.