Fieldmann FZR 5110-B - Manual (Page 9)

EN
PETROL LAWNMOWER USER'S MANUAL
9 Description of the machine | Assembly/Preparation | Assembling the lawnmower
3. DESCRIPTION OF THE MACHINE
(fi gure 1)
1. Top part of the handle
2. Start/brake lever
3. Travel lever
4. Pull cord
5. Quick coupling screw
6. Grass catcher
7. Bottom part of the handle
8. Mowing height adjustment lever
9. Fuel primer bulb
10. Side discharge fl ap
11. Front handle
12. Small items tray
4. ASSEMBLY/PREPARATION
Before assembling and starting the petrol lawnmower, fi rst carefully read the entire user's manual and the
instructions contained in it.
IMPORTANT INFORMATION: The lawnmower is supplied WITHOUT FUEL AND OIL in the engine.
Your new lawnmower was assembled and tested at the factory.
TAKING THE LAWNMOWER OUT OF THE CARDBOARD PACKAGING
Take the lawnmower out of the cardboard packaging and check that no loose parts are left in the packaging.
5. ASSEMBLING THE LAWNMOWER
IMPORTANT INFORMATION: Carefully unfold the lawnmower handle careful not to pinch your fi nger or
damage the lawnmower's control cables.
ASSEMBLING THE HANDLE
1. Insert the bottom part of the handle (fi gure 1 - point 7) into the respective hole on the lawnmower and after
setting it at an appropriate handle height (2 positions), secure in place with screws.
2. Remove the protective padding and fi t the top part of the handle (fi gure 1 - point 1) into the hole in the bottom
part of the handle and tighten both fastening screws (fi gure 1 - point 5).
INSTALLING THE SMALL ITEMS TRAY (fi gure 1 - point 12)
Fasten the small items tray to the handle using the included screws.