beautypg.com

Sliding door open flash, Power sliding door — if equipped – Chrysler 2005 Town and Country User Manual

Page 31

background image

NOTE:

The driver’s side sliding door cannot be opened

while the fuel door is open. This feature operates only
when the sliding door is fully closed prior to opening the
fuel door.

Sliding Door Open Flash
When the sliding door(s) are opened, the left and right
exterior hazard lights will flash for 12 seconds to alert
other drivers in the area that passenger(s) could be
entering or exiting the vehicle.

The Sliding Door Open Flash can be enabled or disabled
by performing the following procedure:

1. Place the key in the ignition switch.

2. Cycle the ignition switch ON/OFF four times ending
in the OFF position. (do not start the engine)

3. Within 10 seconds of the final cycle, press the hazard
switch.

4. A single chime will sound to signify that you have
successfully completed the programming.

You can turn the feature back on by repeating the above
mentioned procedure or by performing the procedure in
the Electronic Vehicle Information Center (EVIC), Cus-
tomer Programmable Features section on vehicles so
equipped.

Power Sliding Door — If Equipped

NOTE:

The power sliding door must be unlocked before

the switches located on the trim panel, just in front of the
power sliding door will operate.

The power sliding door may be opened manually or by
using the buttons on the remote keyless entry transmitter.

Press the buttons on the remote keyless entry transmitter
twice within five seconds, to open a power sliding door.
Once the door is fully open, pressing the button twice
within five seconds a second time will close the door.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

31

2

This manual is related to the following products: