Creek Audio T50 - Manual (Page 8)

Designed and made in the UK.
CREEK T50 SPECIFICATION
WAVE BANDS Worldwide FM 87- 108 MHz
Japan FM 76 - 90 MHz
Europe MW/AM 522 - 1611 kHz
USA AM 530 - 1710 kHz
Europe Only LW 144 - 288 kHz
FREQUENCY INCREMENTS 50 KHz FM 9 kHz AM (10kHz for America)
199 kHz auto 200 kHz USA
SENSITIVITY (IHF 50dB) < 20 µµV mono, < 100 µµV FM stereo
SELECTIVITY (IHF) > 70 dB ± 0.4 MHz FM
> 60 dB ± 15 kHz AM
NUMBER OF PRE-SETS 99-FM 6-LW 29-AM/FM
FREQUENCY RESPONSE FM ONLY 20 Hz to 16 kHz -1 dB
TOTAL HARMONIC DISTORTION < 0.3% (FM), < 3% (AM)
STEREO SEPARATION FM only > 30 dB
SIGNAL TO NOISE FM only > 69 dB (full limiting)
OUTPUT VOLTAGE 500 mV RMS for 50 kHz deviation
AERIAL CONNECTIONS 300 Ω Ω and 75 Ω Ω co-ax
POWER CONSUMPTION MAX 7 VA
POWER SUPPLY VOLTGE 220/240 V AC 50 Hz UK, Europe & Asia
100/120 V AC 60 Hz
REMOTE CONTROL PROTOCOL RC5 (Philips)
SIZE 43 X 6 X 25 cm 17 x 2.4 x 10”
WEIGHT 4 Kg - 9 lbs
MAINS VOLTAGE AND FREQUENCY IS INTERNALLY SET FOR THE COUNTRY OF USE
Creek Audio Ltd reserves the right to change or modify the specification of its products without prior warning.
Creek Audio Ltd.
12 Avebury Court, Mark Road, Hemel Hempstead, HP2 7TA, England
Tel: +44 (0) 1442 260146 Fax: +44 (0) 1442 243766
E-mail: [email protected] Internet: www.creekaudio.com