E-MU PIPEline - Manual (Page 10)

Connect your E-MU PIPEline™ units 7
Connecting a unit as a Receiver
NOTE When E-MU PIPEline™ is set as a receiver, you can engage a
limiter when in analog output mode to minimize the effects of
clipping. Set the D/A switch to the middle position as indicated in
the table found on page 5.
OR
2a 2b
1b
1c
1d
1a
CH B/P R/T D/A
FIEXI JACKS
1a Powered stereo or 2.1 speakers, headphones or line
level input amplifier
1b Stereo to RCA cable
1c Stereo cable
1d RCA 75-ohm digital cable (S/PDIF 48 kHz connection)
2a Optional 5V power supply adapter
2b AC power outlet
EMU Pipeline UG.fm Page 7 Wednesday, March 4, 2009 5:56 PM