Powering up, Standalone operation, Usb powered operation – E-MU SHORTBoard 49 User Manual
Page 8: Standalone operation usb powered operation
6
LONGboard
61
SHORTboard
49
POWERINg UP
Standalone Operation
The keyboard can be powered using any of the following methods:
Via USB when connected to a computer
•
The included 5V @ 500mA power supply
•
With a USB type power supply
•
(not included)
(6) D-size batteries
•
USB Powered Operation
The keyboard can receive power through the USB cable when connected to
a PC or Mac. The USB connection can also transmit and receive MIDI data
to and from the computer. Audio is not transmitted or received over
USB.
Important: Always connect to the USB jack on the computer itself
and NOT to a low-power USB connection that may be present on your
computer keyboard or other USB peripheral.
TIP:
•
If the keyboard doesn’t work when powered via USB, try discon-
necting the USB cable and using the AC adapter for power.
(Your computer may not be supplying enough power through the USB port.)
Battery Installation
The battery compartment is located on the bottom panel of the unit. Press
the two tabs to open. Install the batteries as labelled on the bottom of the
battery compartment with the + aligned with the + side of the batteries.