Empress Effects Vintage Modified Superdelay - Manual (Page 13)

12
Tape Mode
Tape Mode was designed to impart some of the classic characteristics of
analog tape delays.
Delay time is controlled with the tap switch, and the d time | ratio knob
functions as a ratio control in Tape Mode.
Sub-mode A – Basic Tape Emulation
Sub-mode A provides basic tape emulation. Tape saturation and
compression artifacts are applied to the delayed signal.
Sub-mode B – Vintage Tape Delay
Sub-mode B adds a little bit of ‘wow’ and ‘flutter’ to the delayed signal;
the kind you would associate with an older tape machine that has tape
mechanisms needing replacement. This mode tends to impart the
sound of a subtle chorus.
Sub-mode C – Vintage Tape Delay with Old Tape
Sub-mode C is similar to sub-mode B but with subtle, intermittent
dropouts as one might experience from old, shedding tape and dirty
heads. The repeated signal will also saturate more than normal.