Empress Effects Superdelay - Manual (Page 19)

18
Expression Pedal
The Empress Effects Superdelay allows an external expression pedal to be
used to control the various features on the fly.
To access this capability plug an expression pedal into the exp pedal jack on
the back of the Superdelay , and use the exp pedal switch to select which
parameter you’d like to control with the pedal. You can select mix, or
feedback. The expression pedal replaces the knob on the top of the unit.
The Superdelay will work with most Tip-Ring-Sleeve (TRS) expression
pedals.
Any expression pedal used with the Superdelay should have:
Tip – signal
Ring – power
Sleeve – ground
The potentiometer in the pedal should measure approximately 10k Ohm.