Empress Effects Buffer+ - Manual (Page 2)

Introduction
The Empress buffer and buffer+ were
designed to be the complete I/O
interface for the pedal board, while
maintaining the highest fidelity to your
guitar's signal.
Signal loss due to long, un-buffered
cable runs is an issue that has plagued
guitar players for decades. The primary
goal of the buffer is to eliminate this
signal loss, ensuing that your tone is
unchanged by your cables.
Additionally, all the connectivity of
your pedal board is consolidated to
make set up quick and easy. In the
buffer+, extra features such as
selectable boost and noise filtering
ensure maximum control of your tone.