Emerson Radio MS3108 - Manual (Page 18)

17
Volume Controls
To increase or decrease the system volume press the VOLUME or buttons
on the front panel or the remote control.
The VOLUME Level Indicator will appear on
the display when you change the volume
level. The level indicator ranges from “00”
(Minimum) to “30” (Maximum).
The system remembers the volume level when the power is switched ‘Off’ and
automatically returns to the same level when the power is switched ‘On’ again.
Electronic Preset Equalizer “EQ” (On Remote Control Only)
The preset equalizer allows you to adjust the sound characteristic for the most
popular types of music.
Press the EQ button on the the remote control to cycle through the following
equalizer settings: FLAT (EQ ‘Off’), POP, CLASSIC, ROCK.
The appropriate EQ indicator appears in the display to confirm your selection. The
system remembers the EQ setting when the power is switched ‘off’ and returns to
the same setting when the power is switched ‘on’ again.
MUTE Button (On Remote Control Only)
Press the MUTE button on the remote control to shut off the speakers temporarily,
for example, to answer the telephone.
The sound stops and the MUTE indicator
flashes in the display.
Press the MUTE button again to cancel the Mute function and restore the sound.
The MUTE indicator disappears.
The Mute function will also be canceled automatically by pressing the
VOLUME or buttons.
MS3108_062806.p65 28/6/2006, 16:54 17