Emerson Radio MS3106 User Manual

Page 22

2 1

Normal Playback

1.) Press the

POWER/STANDBY button to turn the system ‘On’. The display

and CD door lighting comes on.

2.) Press the CD/DISC SKIP button

on the front panel or remote

control to select the CD function.

The display will show a series of

flashing “dashes” (— — — ) while

the player searches for a disc,

and then the words “no disc” will appear.

3.) Press the

OPEN/CLOSE button on the front panel or remote control to

open the CD door.

IMPORTANT: THIS SYSTEM IS SHIPPED

WITH THREE (3) DUMMY PAPER “CDs”

IN THE M ECHANISM FOR DISPLAY

PURPOSES ONLY. THESE DUMMY CDs

MUST BE REMOVED AND DISCARDED

BEFORE YOU CAN USE THE CD PLAYER.

PLEASE REMOVE AND DISPOSE OF THEM NOW.

4.) Insert up to 3 CDs in the mechanisms with the printed label side facing outward.

Press down gently on each disc near the center hole to make sure that the

discs are properly ‘seated’ on the spindles.

MUSIC

MS3106_010804.p65

8/1/2004, 11:40