Emerson Radio ES25 - Manual (Page 28)

27
PROGRAMMED PLAYBACK
This system has a 20 track programmable memory. You can program up to 20
tracks on a disc to playback in any desired order.
Note: You cannot program the player while a disc is playing. You must press
the STOP/BAND button first to stop playback before beginning the
programming steps below.
1.) Load your disc as usual and wait until the display shows the total playing time
and number of tracks.
2.) Press the PROGRAM button on the front panel
or the remote control. The track number ”00”
flashes. The PROGRAM indicator and program
memory number “P–01” appears in the display.
3.) Press the / buttons on the front panel
of the main unit or > / < buttons on the remote
control to select the first track you wish to
program.
Example: Track 07.
4.) Press the PROGRAM button again to enter
Track 07 in Program Memory 01. The Program
number advances to “P–02” and the track
display returns to flashing “00”.
5.) Repeat Steps 3 and 4, selecting a different track number each time until you
have entered up to 20 tracks in the memory.
ES25_072904.p65 30/7/2004, 11:34 27