Emerson Radio CR276BE - Manual (Page 9)

8
OPERATION (CONTINUED)
Install the leveling foot and the bottom hinge bracket on the new bottom side. Then tighten the
screws of the bottom hinge bracket.
3
Slot the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new
side and check the fitting between the door/ hinge moving smoothly. Then tighten the screws
of the upper hinge bracket. Replace the hinge cover and the right side screw covers.
4
5
Check that the door is aligned horizontally and vertically and that the seals are closed on all
sides before finally tightening the upper hinge. Re-adjust the leveling feet.