Cannon PEMBROKE 10593G - Manual (Page 28)

28
SOMETHING WRONG
WITH YOUR COOKER
PROBLEM
Before contacting your Service Centre or Installer, check the problem guide
below, there may be nothing wrong with your cooker.
CHECK
Ignition does not work.
Burner ports Ignitor
Burner ports Ignitor
Burner ports Ignitor
Oven burner
Grill burner
Hotplate burner.
If all burners fail to ignite:
Check that sparks appear at the burners; a clicking
noise should be heard.
If not
Check that the electricity supply is turned on.
If the electricity supply has failed, the hotplate burn-
ers and grill can be lit by a match.
If only one burner fails to ignite:
Check that the burner is dry and that spillage of food
or cleaning fluid remains are not affecting the ignitor
or burner ports.
Clean away any debris with a dry nylon brush such as
an old toothbrush. If a wire wool pad has been used
for cleaning around the burner ensure the ignitor is
free from any stray strands. Any water on the burner
should be dried with a cloth or kitchen towel.
On the hotplate make sure that all the burner parts
are correctly seated.