elysia xfilter 500 - Manual (Page 5)

5
Frequency (High Mid)
Sets the center frequency for the high mid peak filter » p. 11
Gain (High Shelf)
Boosts or cuts the high frequency range » p. 9
Frequency (High Shelf)
Sets the frequency for the high shelf filter » p. 9
Passive Massage
Activates a special passive LC filter network (LED on) or deacti-
vates this additional fixed band (LED off) » p. 7
Low Cut
Switches the low shelf filter (LED off) into a low cut filter with
resonance (LED on) » p. 8
Narrow Q (High Mid)
Changes the Q factor of the high mid filter from a wide curve
(LED off) to a narrow curve (LED on) » p. 11
Narrow Q (Low Mid)
Changes the Q factor of the low mid filter from a wide curve
(LED off) to a narrow curve (LED on) » p. 10
High Cut
Switches the high shelf filter (LED off) into a high cut filter with
resonance (LED on) » p. 9
Hit It!
Activates the xfilter 500 (LED on) or deactivates it with a hard-
wire bypass (LED off)