Ecler DACORD-i - Manual (Page 5)

5
4. MODELS
DACORD T108i
Employs an 8” high performance bass driver with polypropylene membrane, capable of
holding up to large cone displacements. This 8” driver is firmly mounted on a steel chassis and
features a powerful ceramic magnet and a 52 mm coil. A 1” tweeter provides the high frequencies.
DACORD T208i
Employs two 8” high performance bass driver with polypropylene membrane, capable of
holding up to large cone displacements. This 8” driver is firmly mounted on a steel chassis and
features a powerful ceramic magnet and a 52 mm coil. Two 1" tweeters are used for high
frequencies.
DACORD H206i
It uses two high efficiency 6.5" low frequency drivers able to support long excursions;
they're mounted on a steel chassis and feature a powerful ceramic magnet and a 49.5mm coil. For
high frequencies a high efficiency 1" compression driver with a nylon diaphragm has been used in
conjunction with an adjustable CD-horn having 90x60 º dispersion.
DACORD H208i
It uses two high efficiency 8" low frequency drivers with a polypropylene diaphragm able to
support long excursions. These 8" are mounted on a steel chassis and feature a powerful ceramic
magnet and a 52mm coil. For high frequencies a high efficiency 1" compression driver with a nylon
diaphragm has been used in conjunction with an adjustable CD-horn having a 90x60º dispersion.
DACORD H208i and DACORD H206i models have a treble presence selector on their
back panel allowing to immediately and simply match the treble response with the application or site
specifications. These two references also have a rotatable horn (see diagram); units are shipped
from factory with 90° of horizontal dispersion and 60° of vertical one, when the loudspeaker is
horizontal.
DACORD SB212
Subwoofer unit. It uses 2 high efficiency 12" low frequency drivers able to support long
excursions. For more detailed information on DACORD SB212 unit please read its specific owner's
manual.