Installation and setup, Requirements, Setting up the hardware – Castelle Office Direct OfficeDirect Storage Server User Manual
Page 10: Requirements setting up the hardware
7
Chapter
2
Installation and Setup
R
EQUIREMENTS
You’ll need a 10/100BaseT Ethernet network with TCP/IP
installed and enabled.
S
ETTING
UP
THE
HARDWARE
Connect Network Cable
Use the RJ45 socket to connect the Storage Server to your hub.
The Storage Server will auto-configure for 10BaseT or
100BaseTX, and full or half duplex.
Connect Printer
If you wish to share a printer, use a standard printer cable to
connect the printer to the Storage Server's parallel port.
Connect Power
Connect the supplied power adapter to a power outlet and the
Storage Server. Press and release the rear-mounted power switch
to begin the start-up procedure.
During the initial 2 or 3 second self-test, ALL of the LEDs will