ebm-papst A3G500-AN33-01 - Manual (Page 8)

Operating instructions A3G500-AN33-01
Translation of the original operating instructions
Fig. 2: Cable routing for fans installed in upright position.
The cables must always be routed downwards.
4.4 Factory settings
Factory settings with which the device is pre-set by ebm-papst.
Operation mode PWM controlling
Group adress 1
Fan / device adress 1
Max. PWM / % 100
Min. PWM / % 0
Save set value to
EEPROM Yes
Set value control Analog
Control function Positive (heating)
Item no. 50178-5-9970 · Revision 82547 · Release 2014-05-08 · Page 8 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com