Cadco Line Chef XAL-135 - Manual (Page 2)

Item # ____________________
Project________________________________________
Model # XAL135
Product Name: PROOFER for Cadco Half Size Digital Convection Oven
(for oven Models XAF-115 & XAF-135)
8 Half Size Sheet Pan Capacity
4.331”
BACK
19.055”
19.055”
8.583”
6.575”
3.7795” 2.7953”
.7874”
21.890” .8661”
.7874”
.8661”
23.622”
29.803”
29.016”
FRONT
CALLOUTS
2. Terminal Board Power Supply
3. Unipotential Terminal
6. Technical Data Plate
8. 3/4” Thread Water Inlet
14. Oven Connection Cable (74”
cable + 1-1/4” connector)
25.590”
24.882”
1.1417” 1.1417”
1.3779”
2.1653”
LEFT
SIDE
19.882”
54” cord + 3” NEMA 6-15P plug”
NOTE: Smaller dimension numbers
are original UNOX metric (mm)
Humidity: When the “Manual” water
button is pressed on the Digital Oven’s
Dynamic Control Panel, water is injected
directly into the water reservoir in the
bottom of the proofing chamber, and
slowly vaporized in the warm reservoir.
Water should be connected to the proofer
water inlet by a mechanical filter and a
cut-off valve. Water must have a pressure
value between 0.5 - 5 bar (7.25 - 72.5
PSI.)