ebm-papst R2E210-AB34-01 - Manual (Page 3)

Operating instructions R2E210-AB34-01
Translation of the original operating instructions
2. PROPER USE
The device is exclusively designed as a built-in device for moving air
according to its technical data.
Any other or secondary use is deemed improper and constitutes a
misuse of the device.
Installations on the customer's side must meet the mechanical, thermal
and service life-related stresses that can occur.
Proper use also includes:
● Use the device only for moving exhaust air from exhaust gas
blowers for wood-based fuels.
● Using the device in accordance with the permitted ambient
temperature, see chapter 3.5 Transport and storage conditions and
chapter 3.2 Nominal data.
● Only using the device in stationary systems.
● Commissioning the built-in component only after installation in
the customer unit.
● Operating the device with all protective features in place.
● Minding the operating instructions.
Improper use
Using the device in the following ways is particularly prohibited and
may cause hazards:
● Operating the device with an imbalance, e.g. caused by dirt deposits
or icing.
● Moving highly corrosive air, e.g. salt spray mist. Exceptions are
devices that are intended for salt spray mist and protected accordingly.
● Operation with external vibrations.
● Operating the device in an explosive atmosphere.
● Operation in medical equipment with a life-sustaining or lifesaving
function.
● Contact with materials that could damage blower parts, e.g. liquids
during cleaning.
● Operation with completely or partially disassembled or modified
protective features.
● Using the device as a safety component or for taking on safety-
related functions.
● In addition, all application options that are not listed under proper use.
Item no. 11880-5-9970 · Revision 82891 · Release 2014-06-06 · Page 3 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com