ebm-papst D3G318-AA37-11 - Manual (Page 8)

Operating instructions D3G318-AA37-11
Translation of the original operating instructions
4.4 Connection screen
No. Conn. Designation Colour Function / assignment
1 1 PE green/
yellow Ground wire
1 3 N blue Supply voltage, neutral conductor, 50/60 Hz
1 4 L black Supply voltage, phase, 50/60 Hz
1 5 COM white 1 Floating status message contact, normally closed connection (2 A, max. 250 VAC,
min. 10 mA, AC1)
1 6 NC white 2 Floating status message contact, normally closed connection
2 8 0-10 V yellow Control input, set value 0-10 VDC, impedance 100 kΩ, SELV
2 10 P orange not assigned
2 11 10 VDC red Voltage output 10 VDC (+/-3 %), max. 10 mA, supply voltage for external devices (e.g.
potentiometer), SELV
2 12 GND blue Reference mass for control interface, SELV
Item no. 50047-5-9970 · ENG · Revision 84593 · Release 2015-01-05 · Page 8 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com