EatSmart Precision Retro - Manual (Page 3)

_ ASSEMBLY ______ ____
Your EatSmart Precision Retro requires some minor assembly
before first use. Follow these directions to properly assemble your
scale and ensure accurate weights.
1. Remove the Precision Retro scale, weighing platform and
stainless steel bowl from the packaging. Set packaging
aside.
2. Carefully unscrew the two screws and washers from the
legs of the scale. Place the washers aside as they are no
longer need.
3. Position the weighing platform so the concave side for
holding the bowl is facing upward. Align the holes in the
weight platform with the two legs and insert the screws.
4. Screw down the weighing platform so that it is secure and
does not easily tilt or rock. You should not have used the
washers for securing the weighing platform.
5. Place the stainless steel bowl on top of the weighing
platform and you are ready to calibrate your scale.
Precision Retro
Assembly Diagram