Chicago Electric STUD WELDER DENT REPAIR KIT 3223 - Manual (Page 3)

Page 3 SKU 3223 For technical questions, please call 1-800-444-3353.
Use eye and ear protection 8. . Always wear ANSI-approved impact safety goggles. Wear
a NIOSH-approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists.
Maintain tools with care
9. . Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords periodically
and, if damaged, have them repaired by a qualified technician. The handles must be kept
clean, dry, and free from oil and grease at all times.
10. Disconnect power. Unplug tool when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
Avoid unintentional starting
12. . Be sure the switch is in the Off position when not in use
and before plugging in. Do not carry any tool with your finger on the trigger, whether it
is plugged in or not.
Stay alert
13. . Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Check for damaged parts
14. . Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn On and Off properly.
15. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
16. Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool. Approved accessories are available from Harbor Freight Tools.
17. Do not operate tool if under the influence of alcohol or drugs. Read warning labels
if taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
18. Use proper size and type extension cord. If an extension cord is required, it must be
of the proper size and type to supply the correct current to the tool without heating up.
Otherwise, the extension cord could melt and catch fire, or cause electrical damage to
the tool. This tool requires use of an extension cord with up to
20 amps capability (up to
50 feet), with wire size rated at 10 AWG. Longer extension cords require larger size wire.
If you are using the tool outdoors, use an extension cord rated for outdoor use (signified
by “WA” on the jacket).
19. Maintenance. For your safety, service and maintenance should be performed regularly
by a qualified technician.
People with pacemakers should consult their physician(s) before use.
20.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
This Stud Welder requires the use of both hands when operating.
21. This helps maintain
tool stability and keeps hands away from the working area of the tool.