Drawmer LX20 Dual Expander Compressor - Manual (Page 6)

LX20 OPERATOR’S MANUAL 4
FRONT & REAR PANEL LAYOUT
1) Expand LED. This illuminates at the onset of expansion.
2) Compression indication.
Moves from right to left during compression.
3) Mute LED.
When on, channel is disabled except in Bypass.
4) VU indication.
Measures signal level at output referred to
system level.
i.e. 0dB corresponds to either !10dBu or +4dBu.
5) Bypass switch.
When switched to bypass, signal passes untreated.
6) Stereo Link switch.
Prevents image shifting during stereo operation.
7) Mains power socket.
8) Mains Fuse.
Use only fuses specified on safety page.
9) Mains Voltage changeover switch.
If incorrect voltage is selected refer to an
authorised dealer.
10) Output socket (unbalanced).
11) Mute Socket.
May be connected to foot switch or control unit.
12) Side-Chain send/return socket.
Ring=Send, Tip=Return.
13) Input socket. (unbalanced).
NOTE:
Input, Output & Mute are 3 inch Mono jacks.
Side chain is a stereo jack.