Dodge 2010 Ram - Manual (Page 140)

• When you turn ParkSense௡ off, the instrument cluster
will display “PARK ASSIST DISABLED.” Further-
more, once you turn ParkSense
௡ off, it remains off
until you turn it on again, even if you cycle the ignition
key.
• When you move the shift lever to the REVERSE
position and ParkSense
௡ is turned off, the instrument
cluster will display “PARK ASSIST DISABLED” mes-
sage for as long as the vehicle is in reverse.
• ParkSense௡, when on, will MUTE the radio when it is
sounding a tone.
• If a ParkSense௡ system malfunction occurs, a single
chime will sound once per ignition cycle. In addition,
the Electronic Vehicle Information Center (EVIC) will
display “CLEAN PARK ASSIST SENSORS” and the
LED in the ParkSense
௡ switch will illuminate. If this
message continues to appear in the Electronic Vehicle
Information Center (EVIC) after making sure the rear
bumper is clean and free of snow, ice, mud, or other
debris, see your authorized dealer.
• Clean the ParkSense௡ sensors regularly, taking care
not to scratch or damage them. The sensors must not
be covered with ice, snow, slush, mud, dirt, or debris.
Failure to do so can result in the system not working
properly. The ParkSense
௡ system might not detect an
obstacle behind the bumper, or it could provide a false
indication that an obstacle is behind the bumper.
• Objects must not be within 12 in (30 cm) from the rear
bumper while driving the vehicle. Failure to do so can
result in the system misinterpreting a close object as a
sensor problem, causing the “CLEAN PARK ASSIST
SENSORS” message to be displayed in the instrument
cluster.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139