Dodge 2013 Challenger User Manual

Page 105

Installing Child Restraints Using The Top Tether
Anchorage

1. Look behind the seating position where you

plan to install the child restraint to find the
tether anchorage. You may need to move the
seat forward to provide better access to the

tether anchorage. If there is no top tether anchorage for
that seating position (see the charts above), move the
child restraint to another position in the vehicle if one is
available.

2. Rotate or lift the cover to access the anchor directly

behind the seat where you are placing the child
restraint.

3. Route the tether strap to provide the most direct path

for the strap between the anchor and the child seat. If
your vehicle is equipped with adjustable rear head
restraints, raise the head restraint, and where possible,
route the tether strap under the head restraint and

between the two posts. If not possible, lower the head
restraint and pass the tether strap around the outboard
side of the head restraint.

1 — Cover

A — Tether Strap Hook

3 — Attaching Strap

B — Tether Anchor

Tether Strap Mounting

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

103